CRANE OVERLOAD PROTECTION ELECTRONICS


OVERLOAD

Crane overload protection electronics with 3 set-points and display to be installed on a front panel.

o Easy and intuitive calibration
o Display of hoisted load and input signal
o Internal monitoring system of load cell integrity and load limitation electronics (fail safe)


AVAILABLE OPTIONS

- Analogue output 4 (0)...20 mA or 0...10 V
- RS-232, RS-485 or fieldbus capabilities
- NEMA 4X / IP67 (transparent protection cover + Option "COVER PAX")
- rail DIN adaptor
- power supply: 48 VAC / 24 VDC (see INDI-BOY2 and DISP-BOYP2 products)
- also available with industrial metallic housing (see CRANE-BOY / CRANE-BOYP products)
Add to basket
for quotation

INDI-BOYINDI-BOY12DISP-BOYPDISP-BOYP12
Type (-) Load limiter for single load cell Load limiter for single load cell Load limiter for single load cell Load limiter for single load cell
Input range (-)
± 24 mVDC / ± 240 mVDC ± 24 mVDC / ± 240 mVDC 20 mA (-2 to +26 mA) 20 mA (-2 to +26 mA)
Sensor excitation (-) 10 VDC @ 125 mA max 10 VDC @ 125 mA max 24 VDC ± 5 % @ 50 mA max. 24 VDC ± 5 % @ 50 mA max.
Display (-) 5 digits (14.2 mm) 5 digits (14.2 mm) 24 VDC ± 5 % @ 50 mA max. 5 digits (14.2 mm)
Accuracy (% F.S.*)
0.1 0.1 0.1 0.1
A/D converter (-)
16 bits 16 bits 16 bits 16 bits
Converter rate (-) Up to 20 readings /s Up to 20 readings /s Up to 20 readings /s Up to 20 readings /s
Service temperature range (°C)
0...+50 0...+50 0...+50 0...+50
Storage temperature range (°C)
-40...+60 -40...+60 -40...+60 -40...+60
Power supply (-)
85...250 VAC, 50/60 Hz (15 VA) 11...36 VDC (11 W), 24 VAC (15 VA) 85...250 VAC, 50/60 Hz (15 VA) 11...36 VDC (11 W), 24 VAC (15 VA)
Qty of relay (-) 3 3 3 3
Relay type (-) "Form A"- potential free "Form A"- potential free Form A - potential free Form A - potential free
Contact rating (-) 3 A @ 250 VAC / 30 VDC 3 A @ 250 VAC / 30 VDC 3 A @ 250 VAC / 30 VDC 3 A @ 250 VAC / 30 VDC
IP rating (-) IP54 IP54 IP54 IP54

*F.S. : Full Scale.
** : 5 VDC @ 65 mA max (jumper selectable).
*** : IP rating for front panel only.
**** : we recommend the INDI-BOY2 and DISP-BOYP2 for use in 24 VDC.
Specifications subject to change without notice.

Datasheets
Manuals
  • MA-CARD-CDS-10-20-30-40_EN.pdf (516.7k) *
  • MA-CRANE-BOY P_EN.pdf (698.77k) *
  • MA-CRANE-BOY P_FR.pdf (798.68k) *
  • MA-CRANE-BOY_EN.pdf (795.17k) *
  • MA-CRANE-BOY_FR.pdf (811.69k) *
  • MA-DISP PAXP_EN.pdf (2.07M) *
  • MA-DISP PAXP_FR.pdf (2.08M) *
  • MA-INDI PAXS_EN.pdf (2.11M) *
  • MA-INDI PAXS_FR.pdf (2.11M) *
Support

* You must be logged in to access these documents.

LOG IN

Create an account

Forgot your password?

Typical Applications
Download our leaflet