WIRE ROPE LOAD CELLS


ATEX CE HOISTING OVERLOAD

Low cost load cells specially designed to measure the tension force on hoisting ropes.

o CE certified for hoisting applications
o Easy installation directly without dismantling on the hoisting rope
o Wide range of measured loads on cable (from 0.25 up to 24 t) and suitable cables (available diameters: from 6 up to 46 mm)
o Material:    - 5500: stainless steel
                     - 5505: nickel-plated steel
o Protection class: IP65
o Sturdy design
o Reliable and economical solution
o Complete range of "CE" certified electronics and load limiters available
o Cable length: see drawing table - CL (other lengths available on request)

AVAILABLE OPTIONS

DUAL-BRIDGE
SIL-PL
AMPLIFIED-OUTPUT
EXi
-50+150
Do you have
specific need ?
Add to basket
for quotation

2 - 5 %
Reference temperature (°C) 23
Compensated temperature range (°C) -10...+45
Service temperature range (°C)
-30...+70
Storage temperature range (°C)
-50...+85
Temperature coefficient of the sensitivity (% F.S.*/10°C) <± 0.1
Temperature coefficient of zero signal (% F.S.*/10°C) <± 0.1
Nominal sensitivity (mV/V) ± 1
Input resistance (ohm(s)) 350 ± 2
Output resistance (ohm(s)) 350 ± 2
Insulation resistance (50 V) (Mohm(s)) > 5000
Reference excitation voltage (VDC)
10
Permissible nominal range of excitation voltage (VDC) 3...12
Safe load limit (% F.S.*) 200
Breaking load (% F.S.*)
>300
Permissible dynamic loading (% F.S.*)
70

* F.S. : Full Scale.
** : can be different (according to the wire rope)
Combined error depends on rope material and on-site calibration
Specifications subject to change without notice

Typical Applications
Download our leaflet

Associated electronics