Load cells

S-load cells, pancake, tension and compression

The range of SENSY force transducers is very wide. This one is characterised by a measuring range varying from 10 N to 50 MN (tension and / or compression) and an accuracy of up to 0.01%. Depending on the capacity and the environment, our force transducer models are available in the following materials: stainless steel, alloy steel, aluminum.

As is standard, SENSY manufactures ‘classic’ models: S-force sensors, miniature models, pancakes, force washers, annular sensors, etc. to which can be added many options to adapt to the conditions of use: high temperature (+ 200° C), low temperature (-50° C), explosive atmosphere, radioactivity, use under pressure, or under vacuum, etc.

These Sensy load cells are available with different output signals: unamplified analog (mV / V), amplified (V, mA), digital (RS-232, RS-485, USB, fieldbus), or wireless.

In addition, SENSY’s structure and flexibility enables it to offer custom-made force transducers to meet the most demanding requirements.

More detailed explanations on the operation of force sensors are available on our "Technology" pages.

Read more
CE ATEX

TENSION AND COMPRESSION LOAD CELLS
Accuracy0.1 %, 0.03 %
Capacity5 kN / 500 kg, 10 kN / 1 t,...
Universal load cell combining accuracy, sturdiness and easy installation
CE ATEX

TENSION AND COMPRESSION LOAD CELLS
Accuracy0.1 %, 0.03 %, 0.02 %
Capacity100 N / 10 kg, 200 N / 20...
High-accuracy universal load cells, easy to install.
Accuracy0.25 %, 0.1 %, 0.03 %
Capacity5 kN / 500 kg, 7,5 kN / 750...
Universal tension and compression load cells for industrial force measurements.
CE ATEX

HEAVY COMPRESSION LOAD CELLS (VERY HIGH CAPACITIES)
Accuracy0.25 %, 0.1 %, 0.05 %, 0.03 %
Capacity30 kN, 50 kN, 100 kN, 200...
High-capacity compression load cells.
CE CSA ATEX IECEX

TENSION AND COMPRESSION LOAD CELLS (VERY HIGH CAPACITIES)
Accuracy0.25 %, 0.1 %, 0.05 %, 0.03 %
Capacity20 kN / 2 t, 30 kN / 3t, 50...
Universal load cells combining accuracy and sturdiness; easy to install.
AccuracySL
Capacity20 kN / 2 t, 30 kN / 3t, 50...
Washer load cells (annular load cells) specially designed for force measurement on bolts.
CE ATEX

THROUGH HOLE (ANNULAR) HEAVY-CAPACITY LOAD CELLS
AccuracySL
Capacity200 kN / 20 t, 300 kN / 30...
Through hole load cells, donut load cells or annular load cells
CE ATEX

MINIATURE TENSION AND COMPRESSION LOAD CELLS
Accuracy1 %
Capacity200 N / 20 kg, 300 N / 30...
Miniature load cells (tension and compression).
CE ATEX

MINIATURE COMPRESSION LOAD CELLS
Accuracy1 %
Capacity200 N / 20 kg, 300 N / 30...
Miniature load cells (compression).
CE ATEX OIML

HERMETICALLY SEALED BENDING BEAM LOAD CELL
AccuracyA3, 0.03 %, C 3
Capacity100 N / 10 kg, 200 N / 20...
High-end load cell combining high accuracy with high resistance in harsh environment.
CE

SINGLE POINT LOAD CELLS "OFF CENTER"
AccuracyA3, 0.03 %
Capacity20 N / 2 Kg, 50 N / 5 Kg,...
Low capacity single point load cell
Accuracy0.5 %
Capacity10 t / 20 klb, 50 t / 100 klb
Load cells specially designed for on-board weighing on trucks.
Accuracy0.5 %
Capacityde 75 kN à 5 Mn, de 7.5t à...
Load link / Tension load cells.
Accuracy0.25 %, SL - HOIST
Capacity10 t / 20 klb, 50 t / 100...
Robust and easy-to-install tension load cells
AccuracySL - FORCE, SL - HOIST, SL...
Capacity0,5 t, 1 t, 2 t, 3 t, 10 t,...
Load pins with standard dimensions.
AccuracySL - FORCE, SL - HOIST, SL...
Capacityfrom 0.5 to 2000 t
Custom-made load pin designed to be installed at the same place of a common axle without any big changes of the existing mechanical...
ATEX CE LEVAGE OVERLOAD

SUBSEA / SUBMERGED LOAD PINS
AccuracySL - HOIST, SL - FORCE
Capacityfrom 0.5 to 2000 t
Custom-made load pin for subsea applications.
ATEX CE HOISTING OVERLOAD

THROUGH HOLE (ANNULAR) LOAD CELLS
Accuracy0.25 %, SL - FORCE, SL - HOIST
Capacity3 kN, 5 kN, 0,5 t, 10 kN, 1...
Annular force transducer specially designed for applications requiring a centred hole.
Accuracy2 - 5 %
Capacityde 2 t à 75 t
Static line tensiometer specially designed to measure the tension force applied to a cable or a rope.
Accuracy2 - 5 %
CapacityFrom 0.4 to 40 t (up to 600 t)
Running line tensiometers designed to measure the tension force of a running rope.
CE

RUNNING LINE TENSIOMETERS WITH REMOVABLE CENTER SHEAVE
Accuracy2 - 5 %
CapacityFrom 0.4 to 40 t (up to 600 t)
Running line tensiometers designed to measure the tension force of a running rope with removable center sheave to allow an easy installation.


Associated electronics