ES
Buscar
Acerca de SENSY
Productos
Tecnología
Aplicaciones
Noticias
Support
Contacto

INSTRUMENTATION

As a manufacturer of load cells and force transducers, we can supply you with complete measurement chains by connecting electronics to our products that meet your needs. Beside analogical or digital amplifiers integrated in our load cells or mounted on their cables, we also offer a broad range of electronic equipment to meet customer requirements: displays, amplifiers, analogue and digital transmitters, etc. This means that for every application, you can find the corresponding range of electronic equipment. As experts in measurement chains in their entirety, we also offer pre-calibration services, remote assistance and initial after-sales services for these electronics.

Nuestros sensores

Electrónica asociada

CRANE-SUMD DISP-SUMD
Crane overload protection electronics with 3 set-points and display for front panel.
CRANE-BOY CRANE-BOYP
Crane overload protection electronics with 3 set-points and display for hoisting device (eot cranes,..).
BRIDGE-BOY
Eot crane overload protection electronics for hoisting device (eot cranes, ...)
SAFETY-BOY
Overload protection electronics for hoisting devices with certification for performance level pl d according to en iso 13849-1.
DISP-F
Large digital displays for distance reading
COACH-II
Eot cranes recording and managing electronics.
JBOX-LCI
Smart junction box designed for parallel connecting of 2 to 4 load cells to an electronics and to ensure the monitoring of their correct functioning.
CRANE-BOY-Exd
Crane overload protection electronics with 3 set-points and display for hazardous area.
CABIN-4xB1SUMD
Crane overload protection electronics for 4 channels and their sum
CABIN-2xB1SUMD
Crane overload protection electronics for 2 channels and their sum
DISP-BOYDP CRANE-BOYDP
Two channels crane overload protection electronics.
INDI-BOY DISP-BOYP
Crane overload protection electronics with 3 set-points and display on a front panel.
DISP-RLT
Display for running line tensiometer.
SPREADER-BOY
Electronics for weighing containers.
COND-USB
Converts the signal from a wheatstone bridge (mv/v) into a standardised digital signal rs-232, rs-485 or usb.
DIGITAL CONVERTER
Convert the signal from a wheatstone bridge (mv/v) into a standardised digital signal rs-232, rs-485 or usb.
ANALOGUE AMPLIFIER
Converts the signal from the wheatstone bridge (mv/v) into a robust industrial standardised 4 to 20 ma signal.
INDI-12390
4 channels digital indicator for 3115f-12390.
WI-T24RE-SO
Base station designed to connect up to 8 wireless load cells (wi-t24tr-xxx)
INDI-ISO376
Very high-accuracy digital indicator for standard reference force transducer.
WI-T24RE-BSx
Base stations designed to connect wireless load cell (wi-t24tr-xxx)
INDI-00
High-accuracy digital indicator for standard reference force transducer.
WI-T24RE-AO1
Radio receiver with analogue output (4..20 ma, 0..10 v).
WI-T24RE-Hx
Hand-held wireless indicator.
WI-T24TR-ACM
Radio transmitter for analogue signals (mv/v, 4..20 ma, 0..10 v).
INDI-PSD
Hand-held indicator for transducer with mv/v output.
INDI-5250
Very high accuracy digital indicator designed for weighing applications.
JBOX
Junction boxes designed to connect several load cells in parallel to the same electronics with corner adjustment.
CONV-UI
Analogue voltage and current signal converter with galvanic isolation.
COND-A420
Conditionner-amplifier with 4..20 ma and 0..10 v output.
COND-SGA
Conditioner-amplifier with 4..20 ma and -10..0..10 v output.
DISP-60
Display for rotary torque sensor
DISP-PAXDP
Dual independent process input meter.
INDI-PAXS DISP-PAX
Universal panel meters for using with load cells and process signals.
INDI-PAX2S DISP-PAX2A
Panel meters with dual line display for wheatstone bridge sensors
INDI-MAXS DISP-MAX
Universal large panel meters to be used with transducers and process signals.

Sensores a medida

Esta página se ha creado para ayudarle a definir correctamente su eje dinamométrico a medida.

Support

Descargue aquí documentos técnicos. En primer lugar, debe registrarse.
Do you have a project for which you need an advice ?
GMT +1
+32 71 25 82 00
SENSY S.A.
Manténgase informado:
Z.I. de Jumet - Allée Centrale - BE-6040 Jumet - Bélgica
Nº de registro (IVA): BE0427858981 - RPM Charleroi
Tel. +32 71 25 82 00
Fax +32 71 37 09 11
Correo electrónico: info@sensy.com
Fabricante de células de carga - Fabricado en Bélgica