ES
Buscar
Acerca de SENSY
Productos
Tecnología
Aplicaciones
Noticias
Support
Contacto
Inicio  >  Producido  >  Standard reference transducers

STANDARD REFERENCE TRANSDUCERS

If you want to calibrate any type of testing machine, either for quality purposes or to obtain an official calibration certificate, then choose a standard reference transducer. There are two methods which can be used to measure a force with accuracy: ‘dead-weight machines’ or testing machines equipped with a transfer force transducer. The first solution is quite expensive and difficult to operate. The second one is cost-effective and increases your flexibility. 

Our standard reference transducers comply with ISO376 (EN 10002-3) accuracy classes “05” and “00” (eventually class “1”) regulations.

We have also developed standard reference transducers with a digital output and dedicated ISO 376 software for connecting the transducers to your computer.

Nuestros sensores

0.2 to 10 kN
Standard reference force transducer specially designed according to the norm iso 376 (class "1", "0,5" and "00").
20 to 100 kN
Standard reference force transducer specially designed according to the norm iso 376 (class "1", "0,5" and "00").
2 to 5 MN
Standard reference force transducer specially designed for checking concrete testing machines according to the norms en 12390-4 and din 51302-2
100 kN to 50 MN
Standard reference force transducer specially designed according to the norm iso 376 (class "1", "0,5" and "00").
150 kN to 50 MN
Standard reference force transducer specially designed according to the norm iso 376 (class "1", "0,5" and "00").

Electrónica asociada

COND-USB
Converts the signal from a wheatstone bridge (mv/v) into a standardised digital signal rs-232, rs-485 or usb.
DIGITAL CONVERTER
Convert the signal from a wheatstone bridge (mv/v) into a standardised digital signal rs-232, rs-485 or usb.
INDI-12390
4 channels digital indicator for 3115f-12390.
INDI-ISO376
Very high-accuracy digital indicator for standard reference force transducer.
INDI-00
High-accuracy digital indicator for standard reference force transducer.
INDI-PSD
Hand-held indicator for transducer with mv/v output.

Sensores a medida

Esta página se ha creado para ayudarle a definir correctamente su eje dinamométrico a medida.

Support

Descargue aquí documentos técnicos. En primer lugar, debe registrarse.
Do you have a project for which you need an advice ?
GMT +1
+32 71 25 82 00
SENSY S.A.
Manténgase informado:
Z.I. de Jumet - Allée Centrale - BE-6040 Jumet - Bélgica
Nº de registro (IVA): BE0427858981 - RPM Charleroi
Tel. +32 71 25 82 00
Fax +32 71 37 09 11
Correo electrónico: info@sensy.com
Fabricante de células de carga - Fabricado en Bélgica