ES
Buscar
Acerca de SENSY
Productos
Tecnología
Aplicaciones
Noticias
Support
Contacto
Inicio  >  Producido  >  Torque transducers

TORQUE TRANSDUCERS

Are you looking for static or dynamic torque meters? Then we have a solution for you, whether or not they are fastened directly on to your equipment! Do you require a process control device for regulating the torque in order to optimise the strain under which your equipment has to work? Do you want to integrate a torque meter directly onto your transmission shaft? Or, for quality assurance purposes, do you need to control and calibrate your pneumatic/electric screwdrivers or torque wrenches? If so, then we can advise you on the most appropriate torque meter. Flexibility is our philosophy, so do not hesitate to contact us for your ‘custom-made’ solutions. The design and development of such new solutions is our strength and our speciality.

Please give us a try – we can guarantee a fast and professional response !

Nuestros sensores

300 to 10 000 N·m
Universal non-rotating torque meters combining accuracy, sturdiness and easy to install.
10 to 2000 N·m
Universal non-rotating torque meters combining accuracy, sturdiness and easy to install.
2.5 to 500 N·m
Non-contact rotating torque sensor.
1 to 100 N·m
Non-contact rotating torque sensor.
50 to 2000 N·m
Non-contact rotary torque sensors
20 to 1100 kN·m
High-range reaction torque transducer with square ends.
50 N m to 20 kN·m
Reaction torque meter designed to be place between ratchet and wrench.
10 to 25 kN·m
Couplemètre rotatif sans contact.
2 to 750 N·m
Non-rotating torque meters with hexagonal head.
2 to 1000 N·m
Non-rotating torque meters with hexagonal head.
3 to 8 kN·m
Non-contact rotary torque sensors

Electrónica asociada

DISP-F
Large digital displays for distance reading
COND-USB
Converts the signal from a wheatstone bridge (mv/v) into a standardised digital signal rs-232, rs-485 or usb.
DIGITAL CONVERTER
Convert the signal from a wheatstone bridge (mv/v) into a standardised digital signal rs-232, rs-485 or usb.
ANALOGUE AMPLIFIER
Converts the signal from the wheatstone bridge (mv/v) into a robust industrial standardised 4 to 20 ma signal.
WI-T24RE-SO
Base station designed to connect up to 8 wireless load cells (wi-t24tr-xxx)
WI-T24RE-BSx
Base stations designed to connect wireless load cell (wi-t24tr-xxx)
WI-T24RE-AO1
Radio receiver with analogue output (4..20 ma, 0..10 v).
WI-T24RE-Hx
Hand-held wireless indicator.
WI-T24TR-ACM
Radio transmitter for analogue signals (mv/v, 4..20 ma, 0..10 v).
INDI-PSD
Hand-held indicator for transducer with mv/v output.
COND-SGA
Conditioner-amplifier with 4..20 ma and -10..0..10 v output.
DISP-60
Display for rotary torque sensor
DISP-PAXDP
Dual independent process input meter.
INDI-PAXS DISP-PAX
Universal panel meters for using with load cells and process signals.
INDI-PAX2S DISP-PAX2A
Panel meters with dual line display for wheatstone bridge sensors
INDI-MAXS DISP-MAX
Universal large panel meters to be used with transducers and process signals.

Sensores a medida

Esta página se ha creado para ayudarle a definir correctamente su eje dinamométrico a medida.

Support

Descargue aquí documentos técnicos. En primer lugar, debe registrarse.
Do you have a project for which you need an advice ?
GMT +1
+32 71 25 82 00
SENSY S.A.
Manténgase informado:
Z.I. de Jumet - Allée Centrale - BE-6040 Jumet - Bélgica
Nº de registro (IVA): BE0427858981 - RPM Charleroi
Tel. +32 71 25 82 00
Fax +32 71 37 09 11
Correo electrónico: info@sensy.com
Fabricante de células de carga - Fabricado en Bélgica