What is the measurement and refresh rate of a display of the PAX series and its analog output (CARD-CDL10) ?

Answer :

 a)     Display

 The measurement speed depends on 2 parameters:

  1. The parameter Filtr (menu 1-INP) adjustable from 0.0 to 25.0 sec and can be disabled by the parameter bANd (menu 1-INP) (see user manual).
  2. The dSP-t parameter (Menu 4 - SEC) can be set to 1, 2, 5, 10 or 20 measures / sec. which allows to configure the display refresh rate.
  3. In the case of the speed of 20 measurements / sec., the internal zero correction is disabled in order to allow the fastest response.

Step response:

  • 200 msec. max. to within 99% of final readout value (digital filter and internal zero correction disabled) (Filtr = 0.0 and dSP-t = 20).
  • 700 msec. max. (digital filter disabled, internal zero correction enabled) (Filtr = 0.0, dSP-t = 10).

 

b)     Analog Output

 The parameter Udt (menu 8 - Out) adjusts the refresh time from 0.0 to 10.0 sec. The value 0.0 corresponds to the maximum speed, ie 20 refreshes per second.

Update time:

  • 200 msec. max. to within 99% of final output value (digital filter and internal zero correction disabled)
  • 700 msec. max. (digital filter disabled, internal zero correction enabled)
Array ( [0] => Array ( [id_gomakoil_faq_category] => 1 [link_rewrite_no] => [active] => 1 [position] => 1 [date_add] => 2017-04-12 11:41:35 [color] => #000000 [id_lang] => 1 [id_shop] => 1 [name] => Electroniques [description] => [meta_title] => FAQ Electroniques SENSY [meta_description] => [meta_keywords] => [link_rewrite] => electroniques )) 1 Array ( [0] => Array ( [id_gomakoil_faq] => 34 [id_gomakoil_faq_category] => 1 [link_rewrite_no] => [most] => 0 [association] => 0 [hide_faq] => 0 [name] => Admin [email] => no [by_customer] => 0 [position] => 18 [active] => 1 [date_add] => 2019-07-02 06:16:56 [as_url] => 0 [id_lang] => 1 [id_shop] => 1 [question] =>

Quelle est la vitesse de rafraîchissement de nos cartes de communication pour les produits de la famille "PAX"?

[answer] =>

Réponse: 

  1. Transmission RS232:
    2 à 50 ms 

  2. Transmission RS485:
    50 à 100 ms

  3. Lecture du PAX:
    1, 2, 5,10 mesures / secondes (Menu 4 – paramètre :  dSP-t)

  4. Sortie Analogique: 
    Un réglage du paramètre udt à 0 (menu 8 – paramètre : udt) entraîne une fréquence de rafraîchissement de 20 fois par seconde.

 

[meta_title] => [meta_description] => [meta_keywords] => [tags] => [link_rewrite] => quel-est-la-vitesse-de-rafraichissement-des-cartes-de-communication-pour-les-pax [link_rewrite_cat] => electroniques )) 1