2162L

- Its rugged metal enclosure makes the device suitable for harsh environment.
- Simply by plugging the device into a PC, data can be extracted from most strain gauge based sensors (full Wheatstone bridge) and computed by specific application software.
- No additional power supply is required. Although ideal for 1 to 1 interface the device can connect with multiple sensors with the use of a suitable hub.
- A choice of MODBUS RTU or ASCII protocols is currently available.
- Quick and easy co

- Full compatible with industrial signal in voltage or current.
- Intuitive and easy programming
- High flexibility
- Many options

- Full compatible with industrial normalized signal 4.20 mA and 0..10 V and also with Sensy weighing, force and torque transducers with amplifier.
- Intuitive and easy programming
- High flexibility
- Many options

BASIC FEATURES
- Approved for 10,000 d. OIML
- Up to 70 measurements per second
- Alibi-memory for 10,000 records
- Parallel connection of up to 10 strain gauge load cells (350 Ohms)
- Display resolution up to 99,000div.
- Bright, 6-digit, red LED display (14mm)
- Serial RS-232C port for connection to serial printer, PC or remote display
- 1 digital input (programmable as tilt input or to tare scale remotely or for other purposes)
- 2 digital outputs (programmable as weight set point

- Full compatible with Sensy weighing, force and torque transducers.
- Intuitive and easy programming
- High flexibility
- Many options

- Easy to install
- Robust
- Economic
- 6 wires connection with the electronics (sense)

- Easy to install
- Very robust
- 6 wires connection with the electronics (sense)
- With corner trimming

- Control the output signal of each sensor separately
- Control the unbalance between the sensor’s signal
- Detection of open circuit and short circuit
- Control of the excitation voltage of the load cells
- Ensure the positive safety for load-limitation systems based on multiple load cells parallel connected (hoisting devices)