EN
Search
About SENSY
Products
Technology
Applications
News
Support
Contact us
Home  >  Products  >  Torque transducers

TORQUE TRANSDUCERS

Are you looking for static or dynamic torque meters? Then we have a solution for you, whether or not they are fastened directly on to your equipment! Do you require a process control device for regulating the torque in order to optimise the strain under which your equipment has to work? Do you want to integrate a torque meter directly onto your transmission shaft? Or, for quality assurance purposes, do you need to control and calibrate your pneumatic/electric screwdrivers or torque wrenches? If so, then we can advise you on the most appropriate torque meter. Flexibility is our philosophy, so do not hesitate to contact us for your ‘custom-made’ solutions. The design and development of such new solutions is our strength and our speciality.

Please give us a try – we can guarantee a fast and professional response !

Our load cells

300 to 10.000 Nm
Universal non-rotating torque meters combining accuracy, sturdiness and easiness to install.
10 to 2000 Nm
Universal non-rotating torque meters combining accuracy, sturdiness and easiness to install.
2.5 to 500 Nm
Non contact rotating torque sensor.
1 to 100 Nm
Non contact rotating torque sensor.
50 to 2000 Nm
Couplemètre rotatif sans contact.
20 to 1100 kNm
High range reaction torque transducer with square ends.
50 Nm to 20 kNm
Non-rotating torque meter meant to be put between the ratchet and the wrench.
10 to 25 kNm
Couplemètre rotatif sans contact.
2 to 1000 Nm
Non-rotating torque meters with hexagonal head.
2 to 750 Nm
Non-rotating torque meters with hexagonal head.
2 to 1000 Nm
Non-rotating torque meters with hexagonal head.
0.5 to 8 kNm
Couplemètre rotatif sans contact.

Associated electronics

Option-U COND-USB
Convert the signal from a wheatstone bridge (mv/v) in a standardized digital signal rs-232, rs-485 or usb.
OPTION-AO J-C-C6-T
Converts the signal from the wheatstone bridge (mv/v) in a robust industrial standardized 4 to 20 ma signal.
DISP-F
Large digital displays for the reading at long distance.
WI-T24-SO
Handheld wireless indicator.
WI-T24-BSx
Handheld wireless indicator.
WI-T24-AO1
Radio receiver with analog output (4..20 ma, 0..10 v).
WI-T24-Hx
Handheld wireless indicator.
WI-T24-ACM
Radio transmitter for analog signal (mv/v, 4..20 ma, 0..10 v).
INDI-PSD
Hand held indicator for transducer with mv/v output.
CONV-UI
Analog voltage and current signal converter with galvanic insulation.
COND-SGA
Conditionner-amplifier with 4..20 ma and -10..0..10 v output.
DISP-60k
Display for running line tensiometer.
DISP-PAXDP
Dual independant process input meter.
INDI-PAX DISP-PAX
Universal panel meters for using with load cells and process signals.

Sensors customizations

This page will help you to define your custom-made load pins.

Support

Manuals, quickstarts, documentation...
Do you have a project for which you need an advice ?
GMT +1
+32 71 25 82 00
SENSY S.A.
Stay informed :
Z.I. de Jumet - Allée Centrale - BE-6040 Jumet - Belgium
VAT n°: BE0427858981 - RPM Charleroi
Tel +32 71 25 82 00
Fax +32 71 37 09 11
Email : info@sensy.com
Load cell manufacturer - made in Belgium