Français
English
HIGH-CAPACITY NON-CONTACT ROTARY TORQUE SENSORS
General purpose, high capacity non-contact rotary torque sensors.
o Bidirectional
o Measurement range up to 25 kN·m (>25 kN·m on request)
o Rotating speed up to 8000 rpm
o Integrated signal conditioning
o Analogue output signal (see Wiring table)
o Cable length: 5 m
AVAILABLE OPTIONS
| 65000-A | 65000-B | |
|---|---|---|
| Capacities (-) | 10 - 15 kN·m | 20 - 25 kN·m |
| Combined error (non-linearity + hysteresis) (% F.S.*) | <± 0.5 | <± 0.5 |
| Repeatability error (% F.S.*) | <± 0.1 | <± 0.1 |
| Rotational signal uniformity (% F.S.*) | <± 0.5 | <± 0.5 |
| Compensated temperature range (°C) | +15...+35 | +15...+35 |
| Service temperature range (°C) | -40...+85 | -40...+85 |
| Storage temperature range (°C) | -40...+85 | -40...+85 |
| Temperature coefficient of the sensitivity (% F.S.*/10°C) | < 0.5 | < 0.5 |
| Temperature coefficient of zero signal (% F.S.*/10°C) | < 0.5 | < 0.5 |
| Zero signal (V) | 5 | 5 |
| Power supply (-) | 9...28 VDC | 9...28 VDC |
| Consumption (max.) (mA) | 40 | 40 |
| Nominal sensitivity (V) | ± 4 | ± 4 |
| Start-up current (mA) | < 100 | < 100 |
| Maximum rotational speed (rpm) | 8000 | 5000 |
| Torque limit (kN·m) | 20 | 30 |
| IP rating (-) | IP50 | IP50 |
*F.S. : Full Scale.
** : See individual calibration sheet.
Specification subject to change without notice.
LOG IN
Associated electronics
| Universal large panel meters to be used with transducers and process signals. |
| Universal panel meters for using with load cells and process signals. |
| Panel meters with dual line display for Wheatstone bridge sensors |
| Dual independent process input meter. |
| Display for rotary torque sensor |
| Conditioner-amplifier with 4..20 mA and -10..0..10 V output. |
| Hand-held indicator for transducer with mV/V output. |
| Radio transmitter for analogue signals (mV/V, 4..20 mA, 0..10 V). |
| Hand-held wireless indicator. |
| Radio receiver with analogue output (4..20 mA, 0..10 V). |
| Base stations designed to connect wireless load cell (WI-T24TR-xxx) |
| Base station designed to connect up to 8 wireless load cells (WI-T24TR-xxx) |
| Converts the signal from the Wheatstone bridge (mV/V) into a robust industrial standardised 4 to 20 mA signal. |
| Convert the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB. |
| Converts the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB. |
| Large digital displays for distance reading |