Contact us
Home  >  Products  >  Force transducers


Are you looking to develop an industrial application where you will need ‘force transducers’? A wide range of such transducers can easily be integrated into your project, especially if your device is operating under tension and/or compression forces. You are almost certain to find the force transducer you require on our website. Do you need any further information regarding the properties and use of our load cells, such as their natural frequency, accuracy or their use in radioactive environments? If the solution to your problem is not available on our website, do not hesitate to contact our team of sales engineers directly.

If you have a question, ask us and we will give you the answer ! As well as our standard products, remember to look at our customised solutions because flexibility is part of our philosophy. Just try us and see – we can guarantee professional advice and a quick response and/or quotation.


Our load cells

10 to 300 kg
High-end load cell combining high accuracy with high resistance in harsh environment.
2 to 200 kg
Low capacity single point load cell
10 to 50 t
Load cells specially designed for on board weighing on trucks.
5 to 100 kN
Universal load cell combining accuracy, sturdiness and easiness to install.
100 N to 10 kN
Capteur de force universel associant précision élevée, robustesse et simplicité de mise en œuvre.
3 kN to 3 MN
Universal tension and compression load cells for industrial force measurements.
30 kN to 50 MN
High capacity compression load cells.
0.5 to 2000 t
Custom-made load pin designed to be installed at the same place of a common axle without any big changes of the existing mechanical environment.
 0.5 to 2000 t
Custom made load pin for subsea applications.
10 kN to 50 MN
Universal load cells combining accuracy, sturdiness and easiness to install.
2 to 100 t
Tension load cells combining sturdiness and easiness to install.
20 to 750 kN
Washer load cell (annular load cell) specially designed for force measurement on bolts.
200 kN to 20 MN
Through hole load cell, donut load cell or annular load cell
50 kN to 5 MN
Load link / tension load cell.
20 to 1000 kN
Load link with rod end bearings.
0.5 to 125 t
Load pin with standard dimensions.
5 to 75 t
Static line tensiometer specially designed to measure the tension force applied to a cable or a rope.
from 0.4 to 600 t
Running line tensiometer designed to measure the tension force of a running rope.
1 to 600 t
Running line tensiometer designed to measure the tension force of a running rope with removable center sheave to allow an easy installation.
0.3 to 20 t
Annular force transducer specially designed for application requiring a centred hole.
200 N to 5 kN
Miniature load cell (tension and compression).
200 N to 20 kN
Miniatures load cell (compression).

Associated electronics

Universal large panel meters to be used with transducers and process signals.
Convert the signal from a wheatstone bridge (mv/v) in a standardized digital signal rs-232, rs-485 or usb.
Convert the signal from a wheatstone bridge (mv/v) in a standardized digital signal rs-232, rs-485 or usb.
Converts the signal from the wheatstone bridge (mv/v) in a robust industrial standardized 4 to 20 ma signal.
Large digital displays for the reading at long distance.
Base station designed to connect up to 8 wireless load cells (wi-t24e-xxx)
Base stations designed to connect wireless load cell (wi-t24e-xxx)
Radio receiver with analog output (4..20 ma, 0..10 v).
Handheld wireless indicator.
Radio transmitter for analog signal (mv/v, 4..20 ma, 0..10 v).
Hand held indicator for transducer with mv/v output.
Analog voltage and current signal converter with galvanic insulation.
Conditionner-amplifier with 4..20 ma and -10..0..10 v output.
Dual independant process input meter.
Universal panel meters for using with load cells and process signals.
Panel meters with dual line display for wheatstone bridge sensors

Sensors customizations

This page will help you to define your custom-made load pins.


Manuals, quickstarts, documentation...
Do you have a project for which you need an advice ?
GMT +1
+32 71 25 82 00
Stay informed :
Z.I. de Jumet - Allée Centrale - BE-6040 Jumet - Belgium
VAT n°: BE0427858981 - RPM Charleroi
Tel +32 71 25 82 00
Fax +32 71 37 09 11
Email : info@sensy.com
Load cell manufacturer - made in Belgium